Publications FTSEET 2021

 

Comparison of sorption efficiency of natural and MnO[2] coated zeolite for copper removal from model solutions Open Accsses 
December 15, 2021
Authors: Balintova M.; Kovacova Z.; Demcak S.; Chernysh Y.; Junakova N.
Source: IOP CONFERENCE SERIES: EARTH AND ENVIRONMENTAL SCIENCE
Document Type: Conference Paper Scopus
Wear Resistance Improvement of Linear Block-Polyurethanes Under Conditions of Liquid Friction Open Accsses 
December 14, 2021
Authors: Panda A.; Anisimov V.M.; Anisimov V.V.; Dyadyura K.
Source: MANAGEMENT SYSTEMS IN PRODUCTION ENGINEERING
Document Type: Article Scopus
Research of Microstructure of Molybden Doped Weldings of Oil and Gas Pipelines Open Accsses 
December 14, 2021
Authors: Pandova I.; Rimar M.; Makarenko V.; Vinnikov Y.; Mangura A.; Zaborowski T.; Aloshyn V.
Source: MANAGEMENT SYSTEMS IN PRODUCTION ENGINEERING
Document Type: Article Scopus

Quantitative study of activated sludge population structure Open Accsses 
December 14, 2021
Authors: Babko R.; Pliashechnyk V.; Kuzmina T.; Zaburko J.; Danko Y.; Łagód G.
Source: JOURNAL OF PHYSICS: CONFERENCE SERIES
Document Type: Conference Paper Scopus

Research on the manufacture and strength of the innovative joint of FRP machine parts Closed Access 
December 2021
Authors: Nekrasov S.; Zhyhylii D.; Dovhopolov A.; Altin Karatas M.
Source: JOURNAL OF MANUFACTURING PROCESSES
Document Type: Article Scopus
Influence of Nitrocarburizing on Increasing the Service Life of Elastic Elements of Direct-Flow Valves  Open Accsses 
November 25, 2021
Authors: Krmela J.; Hovorun T.; Berladir K.; Artyukhov A.; Kasian S.
Source: MANUFACTURING TECHNOLOGY
Document Type: Article Scopus
Sedimentation Tanks for Treating Rainwater: CFD Simulations and PIV Experiments  Open Accsses 
November 23, 2021
Authors: Czernek K.; Ochowiak M.; Janecki D.; Zawilski T.; Dudek L.; Witczak S.; Krupińska A.; Matuszak M.; Włodarczak S.; Hyrycz M.; Pavlenko I.
Source: ENERGIES
Document Type: Article Scopus
Analysis of Permissible Limits for Leachable of Trace Impurities from Bone Substitutes Containing Hydroxyapatite and Beta-Tricalcium Phosphate  Closed Access 
November 18, 2021
Authors: Dyadyura K.; Hrebenyk L.; Ivakhniuk T.; Vyshegorodtseva M.; Primova L.
Source: ADVANCED MANUFACTURING PROCESSES III, INTERPARTNER-2021
Document Type: Proceedings Paper Web of Science
Diagnostics of the Rotor-Stator Contact by Spectral Analysis of the Vibration State for Rotor Machines  Closed Access 
November 18, 2021
Authors: Pavlenko I.; Savchenko I.; Pitel J.; Ivanov V.; Ruban A.
Source: ADVANCED MANUFACTURING PROCESSES III, INTERPARTNER-2021
Document Type: Proceedings Paper Web of Science
Experimental Investigation of Gas-Liquid Layer Height in a Combined Contact Device Closed Access 
November 18, 2021
Authors: Moiseev V.; Liaposhchenko O.; Hatala M.; Manoilo E.; Khukhryanskiy O.
Source: ADVANCED MANUFACTURING PROCESSES III, INTERPARTNER-2021
Document Type: Proceedings Paper Web of Science
Features of Flexural-Torsional Oscillations of Cantilever Boring Bars for Fine Boring of Deep Holes with Small Diameters Closed Access 
November 18, 2021
Authors: Orgiyan A.; Oborskyi G.; Ivanov V.; Tonkonogyi V.; Balaniuk A.
Source: ADVANCED MANUFACTURING PROCESSES III, INTERPARTNER-2021
Document Type: Proceedings Paper Web of Science
Surface Strengthening Technology for Hammers of a Four-Die Forging Device Closed Access 
November 18, 2021
Authors: Hovorun T.; Berladir K.; Gusak O.
Source: ADVANCED MANUFACTURING PROCESSES III, INTERPARTNER-2021
Document Type: Proceedings Paper Web of Science
Theoretical Substantiation of Mathematical Models of Oil Filtration Through a Porous Medium  Open Accsses 
November 18, 2021
Authors: Ablieieva I.; Plyatsuk L.; Burla O.; Chekh O.; Enrich-Prast A.
Source: ADVANCED MANUFACTURING PROCESSES III, INTERPARTNER-2021
Document Type: Proceedings Paper Web of Science
Biomass Combustion Control in Small and Medium-Scale Boilers Based on Low Cost Sensing the Trend of Carbon Monoxide Emissions  Open Accsses 
November 13, 2021
Authors: Mižáková J.; Piteľ J.; Hošovský A.; Pavlenko I.; Ochowiak M.; Khovanskyi S.
Source: PROCESSES
Document Type: Article Web of Science
Theoretical Basics of Final Drying of Ammonium Nitrate with Nanoporous Structure in Gravitational Shelf Dryers Closed Access 
October 31, 2021
Authors:  Artyukhova N.O.; Krmela J.; Krmelova V.
Source: NANOMATERIALS AND NANOCOMPOSITES, NANOSTRUCTURE SURFACES, AND THEIR APPLICATIONS. NANO 2020. SPRINGER PROCEEDINGS IN PHYSICS
Document Type: Conference Paper Scopus
Methods for Controlling the Properties of Nanoporous Layers in Granules of Porous Ammonium Nitrate: Stage of Drying Closed Access 
October 31, 2021
Authors: Artyukhova N.O.; Krmela J.; Krmelova V.; Artyukhov A.E.
Source: NANOMATERIALS AND NANOCOMPOSITES, NANOSTRUCTURE SURFACES, AND THEIR APPLICATIONS. NANO 2020. SPRINGER PROCEEDINGS IN PHYSICS
Document Type: Conference Paper Scopus
Nanoporous Organo-Mineral Fertilizers Obtained by Using of Granule Shell Technology Closed Access 
October 31, 2021
Authors: Yanovska G.O.; Vakal V.S.; Artyukhov A.E.; Shkola V.Y.; Yarova T.Y.; Vakal S.V.
Source: NANOMATERIALS AND NANOCOMPOSITES, NANOSTRUCTURE SURFACES, AND THEIR APPLICATIONS. NANO 2020. SPRINGER PROCEEDINGS IN PHYSICS
Document Type: Conference Paper Scopus
Development of pumps with improved anti-cavitation characteristics Open Accsses 
October 31, 2021
Authors: Tiahno O.; Vorozhka A.; Ovcharenko M.; Loburenko M.; Papchenco A.
Source: EASTERN-EUROPEAN JOURNAL OF ENTERPRISE TECHNOLOGIES
Document Type: Article Scopus
Analysis of the Quality of Sulfomolybdenum Coatings Obtained by Electrospark Alloying Methods Open Accsses 
October 23, 2021
Authors: Gaponova O.P.; Antoszewski B.; Tarelnyk V.B.; Kurp P.; Myslyvchenko O.M.; Tarelnyk N.V.
Source: MATERIALS
Document Type: Article Web of Science
Qualimetric method of assessing risks of low quality products Open Accsses 
October 2021
Authors: Trishch R.; Nechuiviter O.; Dyadyura K.; Vasilevskyi O.; Tsykhanovska I.; Yakovlev M.
Source: MM SCIENCE JOURNAL
Document Type: Article Scopus
Increasing of wear resistance of linear block-polyurethanes by thermal processing methods Open Accsses 
October 2021
Authors: Panda A.; Anisimov V.M.; Anisimov V.V.; Dyadyura K.; Pandova I.
Source: MM SCIENCE JOURNAL
Document Type: Article Scopus
Influence of non-metallic inclusions on the corrosion resistance of stainless steels in arc surfacing Open Accsses 
October 2021
Authors: Pandova I.; Makarenko V.; Mitrofanov P.; Dyadyura K.; Hrebenyk L.
Source: MM SCIENCE JOURNAL
Document Type: Article Scopus
Combined Electrospark Running-in Coatings of Bronze Parts. Part 3. Tribological Properties Open Accsses 
October 2021
Authors: Gaponova O.P.; Tarelnyk V.B.; Martsynkovskyy V.S.; Konoplianchenko Ie.V.; Melnyk V.I.; Vlasovets V.M.; Kirik G.V.; Tarelnyk N.V.; Mikulina M.O.; Kutakh A.A.; Polyvanyi A.D.; Mayfat M.M.; Kalnaguz A.N.
Source: METALLOFIZIKA I NOVEISHIE TEKHNOLOGII
Document Type: Article Scopus
Improving the Technical Level of Hydraulic Machines, Hydraulic Units and Hydraulic Devices using a Definitive Assessment Criterion at the Design Stage  Open Accsses 
September 15, 2021
Authors: Andrenko P.; Hrechka I.; Khovanskyi S.; Rogovyi A.; Svynarenko M.
Source: JOURNAL OF MECHANICAL ENGINEERING
Document Type: Article Scopus
Combined Electrospark Running-in Coatings of Bronze Parts. Part 2. Distribution of Elements in a Surface Layer  Open Accsses 
September 2021
Authors: Gaponova O.P.; Tarelnyk V.B.; Martsynkovskyy V.S.; Konoplianchenko Ie.V.; Melnyk V.I.; Vlasovets V.M.; Tarelnyk N.V.; Gerasimenko V.O.; Bondarev S.G.; Batalova A.B.; Kirik G.V.; Polyvanyi A.D.; Semirnenko Yu.I.; Ryasnaya O.V.
Source: METALLOFIZIKA I NOVEISHIE TEKHNOLOGII
Document Type: Article Scopus
Determining the main regularities in the process of mineral fertilizer granule encapsulation in the fluidized bed apparatus  Open Accsses 
August 30, 2021
Authors: Ostroha R.; Yukhymenko M.; Bocko J.; Artyukhov A.; Krmela J.
Source: EASTERN-EUROPEAN JOURNAL OF ENTERPRISE TECHNOLOGIES
Document Type: Article Scopus
Fluoride ion conductivity of solid solutions KxPb0.86–xSn1.14F4–x  Open Accsses 
August 27, 2021
Authors: Pohorenko Y.; Pshenychnyi R.; Pavlenko T.; Omelchuk A.; Trachevskyi V.
Source: JOURNAL OF THE SERBIAN CHEMICAL SOCIETY
Document Type: Article Scopus
Development, characterization and antimicrobial properties of silver nanoparticles loaded chitosan-alginate sponges for biomedical application  Closed Access 
August 26, 2021
Authors: Yanovska A.; Husak Ye.; Korniienko V.; Holubnycha V.; Mishchenko O.; Banasiuk R.; Radwan-Pragłowska J.; Piątkowski M.; Janus Ł.; Pogorielov M.
Source: JOURNAL OF MATERIALS RESEARCH
Document Type: Article Scopus / Web of Science
Rationale for the Combined Use of Biological Processes and AOPs in Wastewater Treatment Tasks Open Accsses 
August 17, 2021
Authors: Shtepa V.; Balintova M.; Chernysh Y.; Chubur V.; Demcak S.; Gautier M.
Source: APPLIED SCIENCES
Document Type: Article Scopus / Web of Science
Technology for porous ammonium nitrate production: modeling of drying machines’ operating modes Open Accsses 
August 2021
Authors: Artyukhova N.; Krmela J.; Artyukhov A.; Krmelová V.; Gavendová M.; Bakošová A.
Source: BULLETIN OF THE POLISH ACADEMY OF SCIENCES: TECHNICAL SCIENCES
Document Type: Article Web of Science
Enhancement of Mechanical, Electrical, and Chemical Properties of Polycarbonate-Based Core-Shell Composites by Modification with Single-Walled Carbon Nanotubes  Closed Access 
Authors: Pogrebnjak A.D.; Postolnyi B.; Marchenko T.; Rudenko P.; Marchenko S.
Source: HIGH TEMPERATURE MATERIAL PROCESSES
Document Type: Article Web of Science
Improvement of Mathematical Model for Sedimentation Process Open Accsses 
July 28, 2021
Authors: Pavlenko I.; Ochowiak M.; Agarwal P.; Olszewski R.; Michałek B.; Krupińska A.
Source: METALS
Document Type: Article Web of Science
Estimation of Wear Resistance for Multilayer Coatings Obtained by Nitrogenchroming Open Accsses 
July 21, 2021
Authors: Pavlenko I.; Zajac J.; Kharchenko N.; Duplák J.; Ivanov V.; Kostyk K.
Source: ENERGIES
Document Type: Article Scopus
Influence of Spray Nozzle Operating Parameters on the Fogging Process Implemented to Prevent the Spread of SARS-CoV-2 Virus  Open Accsses 
July 15, 2021
Authors: Pavlenko I.; Zajac J.; Kharchenko N.; Duplák J.; Ivanov V.; Kostyk K.
Source: ENERGIES
Document Type: Article Web of Science

 

Mobile Applications in Engineering Based on the Technology of Augmented Reality Open Accsses 
June 16, 2021
Authors: Zhylenko T.; Ivanov V.; Pavlenko I.; Martynova N.; Zuban Y.; Samokhvalov D.
Source: INNOVATIONS IN MECHATRONICS ENGINEERING. ICIENG 2021. LECTURE NOTES IN MECHANICAL ENGINEERING
Document Type: Conference paper Scopus
Directed Fluidized Bed in Vortex Granulators: Optimization Calculation of Hydrodynamic Characteristics Closed Access 
June 9, 2021
Authors: Artyukhov A.
Source: MODERN INFORMATION TECHNOLOGY AND IT EDUCATION. SITITO 2017. COMMUNICATIONS IN COMPUTER AND INFORMATION SCIENCE
Document Type: Conference paper Scopus
Fluidized bed in gravitational shelf dryers: optimization calculation Open Accsses 
June 2021
Authors: Artyukhova N.; Krmela J.; Krmelová V.; Artyukhov A.; Gavendová M.
Source: BULLETIN OF THE POLISH ACADEMY OF SCIENCES: TECHNICAL SCIENCES
Document Type: Conference paper Scopus
Modeling of Technological Processes for a Rectification Plant in Second-Generation Bioethanol Production Open Accsses 
May 27, 2021
Authors: Liaposhchenko O.; Marenok V.; Skydanenko M.; Pavlenko I.; Ochowiak M.; Mižáková J.; Piteľ J.; Storozhenko V.; Smyrnov V.; Shmatenko V.
Source: PROCESSES
Document Type: Article Web of Science
Strengthening of the NKV Type Centrifugal Pump’s Shaft by Chemical-Thermocycling Treatment  Closed Access 
May 26, 2021
Authors: Berladir K.; Hovorun T.; Gusak O.
Source: ADVANCES IN DESIGN, SIMULATION AND MANUFACTURING IV. DSMIE 2021. LECTURE NOTES IN MECHANICAL ENGINEERING
Document Type: Conference paper Scopus
Rational Choice of a Material for Orthopedic Insoles Based on the Mechanical Characteristics and Practical Application Purposes Closed Access 
May 26, 2021
Authors: Zaloha R.; Dyadyura K.; Zaloha V.; Hatala M.
Source: ADVANCES IN DESIGN, SIMULATION AND MANUFACTURING IV. DSMIE 2021. LECTURE NOTES IN MECHANICAL ENGINEERING
Document Type: Conference paper Scopus
Mobile Application for Test Control of Knowledge Among Mechanical Engineering Students  Closed Access 
May 26, 2021
Authors: Alexeyev A.; Malandii T.; Moshna A.
Source: ADVANCES IN DESIGN, SIMULATION AND MANUFACTURING IV. DSMIE 2021. LECTURE NOTES IN MECHANICAL ENGINEERING
Document Type: Conference paper Scopus
Improvement of the Gear Shaping Effectiveness for Bimetal Gears of Internal Gearing with a Friction Coating  Closed Access 
May 26, 2021
Authors: Korotun M.; Denysenko Y.; Ciszak O.; Ivchenko O.
Source: ADVANCES IN DESIGN, SIMULATION AND MANUFACTURING IV. DSMIE 2021. LECTURE NOTES IN MECHANICAL ENGINEERING
Document Type: Conference paper Scopus
Interaction of Flexural and Torsional Shapes Vibrations in Fine Boring with Cantilever Boring Bars  Closed Access 
May 25, 2021
Authors: Orgiyan A.; Oborskyi G.; Ivanov V.; Balaniuk A.; Matzey R.
Source: ADVANCES IN DESIGN, SIMULATION AND MANUFACTURING IV. DSMIE 2021. LECTURE NOTES IN MECHANICAL ENGINEERING
Document Type: Conference paper Scopus
Co-digestion of poultry litter with cellulose-containing substrates collected in the urban ecosystem  Closed Access 
May 25, 2021
Authors: Chernysh Y.; Roy I.; Chubur V.; Shulipa Y.; Roubík H.
Source: BIOMASS CONVERSION AND BIOREFINERY
Document Type: Article Scopus

Concentration of aqueous solutions of low-volatile liquids in a falling film with evaporation into a cross-gas flow  Open Accsses
May 20, 2021
Authors: Lukashov V.К., Кostiuchenko Y.V., Sereda V.I.
Source: VOPROSY KHIMII I KHIMICHESKOI TEKHNOLOGII
Document Type: Article Scopus
Improving Ecological Safety when Forming Wear-Resistant Coatings on the Surfaces of Rotation Body Parts of 12Kh18N10T Steel Using a Combined Technology Based on Electrospark Alloying  Closed Access
May 6, 2021
Authors: Tarelnyk V.B.; Gaponova O.P.; Loboda V.B.; Konoplyanchenko E.V.; Martsinkovskii V.S.; Semirnenko Yu.I.; Tarelnyk N.V.; Mikulina M.A.; Sarzhanov B.A.
Source: SURFACE ENGINEERING AND APPLIED ELECTROCHEMISTRY
Document Type: Article Scopus
Modeling of the manufacturing systems state in the conditions of the lean production Open Accsses 
Authors: Dyadyura K.; Hrebenyk L.; Krenicky T.; Zaborowski T.
Source: MM SCIENCE JOURNAL
Document Type: Article Scopus
Distribution of the Dispersed Phase in the Gas Cleaning Equipment with Pulsating Plug  Open Accsses
Authors: Kozii I.S.; Plyatsuk L.D.; НuretsL.L.
Source: PROBLEMELE ENERGETICII REGIONALE
Document Type: Article Web of Science
Selective to lithium ions nanocomposite sorbents based on TiO2 containing manganese spinel  Open Accsses
April 24, 2021
Authors: Chaban M.O.; Rozhdestvenska L.M.; Palchik O.V.; Ponomarova L.M.; Dzyazko Y.S.
Source: VOPROSY KHIMII I KHIMICHESKOI TEKHNOLOGII
Document Type: Article Scopus

Simulation of Diffusion Processes in Chemical and Thermal Processing of Machine Parts  Open Accsses
April 15, 2021
Authors: Kostyk K.; Hatala M.; Kostyk V.; Ivanov V.Pavlenko I.; Duplakova D.
Source: PROCESSES
Document Type: Article Web of Science

Ensuring economic efficiency of flexible fixtures in multiproduct manufacturing  Open Accsses
March 31, 2021
Authors: Ivanov V.; Liaposhchenko O.; Denysenko Y.; Pavlenko I.
Source: ENGINEERING MANAGEMENT IN PRODUCTION AND SERVICES
Document Type: Article Scopus
Mathematical Modelling of Dynamic System Rotor-Groove Seals for the Purposes of Increasing the Vibration Reliability of NPP Pumps  Open Accsses
March 19, 2021
Authors: Shevchenko S.; Shevchenko O.; Vynnychuk S.
Source: NUCLEAR AND RADIATION SAFETY
Document Type: Article Scopus
Automatic Generation of the Machining Processes for Turned Components in CAD/CAM System  Closed Access 
March 17, 2021
Authors: Dodok T.; Čuboňová N.; Císar M.; Ivanov V.
Source: ADVANCES IN MANUFACTURING ENGINEERING AND MATERIALS II. ICMEM 2021
Document Type: Proceedings Paper Web of Science
Ensuring the Quality of Training Engineers in a Virtual Environment  Closed Access 
February 5, 2021
Authors: Bilous O.; Hovorun T.; Berladir K.; Dunaeva M.
Source: ADVANCED MANUFACTURING PROCESSES II. LECTURE NOTES IN MECHANICAL ENGINEERING
Document Type: Proceedings Paper Web of Science
Standardization Issues of Test Methods for Engineering Nanomaterials  Closed Access 
February 5, 2021
Authors: Dyadyura K.; Ivakhniuk T.; Hrebenyk L.; Ivakhniuk U.; Sukhodub L.
Source: ADVANCED MANUFACTURING PROCESSES II. LECTURE NOTES IN MECHANICAL ENGINEERING
Document Type: Proceedings Paper Web of Science
Parameter Identification of the Heat Supply System in a Coach  Closed Access 
February 5, 2021
Authors: Khovanskyi S.; Pavlenko I.; Pitel J.; Bogdaniuk O.; Ivanov V.
Source: ADVANCED MANUFACTURING PROCESSES II. LECTURE NOTES IN MECHANICAL ENGINEERING
Document Type: Proceedings Paper Web of Science
 
 
 
 

Sumy State University Library
116, Kharkivska st.
40007 Sumy, Ukraine

  +38 (0542) 68-79-29
  info@library.sumdu.edu.ua

When using materials from the site of the Library of the SumDU, the reference to the resource is necessarily!

library.sumdu.edu.ua